Description: SK-TU3-CTR ( NORD
)
NORD SK-TU3-CTR KEYPAD STANDARD FOR SK500 INVERTER DRIVE
Product Name: NORD SK-TU3-CTR KEYPAD STANDARD FOR SK500 INVERTER DRIVE
Product Brand: NORD
Product Code: SK-TU3-CTR
Product Artikel: NORD SK-TU3-CTR KEYPAD STANDARD FOR SK500 INVERTER DRIVE
Size 10: 395mm Wide x 292mm Deep x 720mm High. IP20 Weight: 49kg. Overload: 150% x 60 seconds, 200% x 3.5 seconds Speed Control Range: 0-400Hz Braking: Minimum 3 ohms external resistor (not supplied) - use the 'Which Resistor' button on this page. 2 Analogue Inputs, 5 Digital Inputs, 1 Analogue Output, 2 Relay Contact sets, DC Bus Terminals, RJ12 port for RS232 Diagnostic Interface. RJ12 Port for RS485 Communication, Safe Stop (STO/SS1), CANopen In/Out RJ45 on board, PTC Input. Input Current: 364A Input Voltage: 380-480V Three Phase +10% -20% at 47-63Hz. EMC Filters: IEC EN61800-3 Category C2 (Industrial) up to cable length of 20 metres shielded. Nord recommend DCL choke to be fitted with this item - please see linked items below. Cubicle mount. Rated 40°C Ambient. Ventilation space in front: [not specified]. Ventilation space above and below: 100mm. Ventilation space at sides: 0mm. Heat Loss at max output: 2640W (approx.) Mounting via 4 x 8mm slotted holes on supplied brackets at rear on 704mm x 360mm centres. Manufacturer part number is SK 515E-133-340-A . Sometimes known as 275721330. (SK515E-133-340-A) Replacement for SK700E-133-340-O if fitted with either Basic I/O module (SK CU1-BSC) or Standard I/O Module (SK SU1-STD). For details of differences please see link below.
