PHOENIX CONTACT 2761622 SUBCON 25/M-SH D-SUB bus connector
PHOENIX CONTACT
Ürün No: 2761622 SUBCON 25/M-SH
Üretici: PHOENIX CONTACT
Confirmed Rating:
☆☆☆☆☆☆
(4.9)
Rating Count: 5925
PHOENIX CONTACT markalı, 2761622 SUBCON 25/M-SH koduna sahip PHOENIX CONTACT 2761622 SUBCON 25/M-SH D-SUB bus connector isimli ürün hakkında detaylı bilgi almak için lütfen canlı destek ekibimiz ile hemen iletişime geçin ya da bir online teklif formu doldurun. Size en kısa sürede dönüş yapacağız.
PLEASE MAIL TO: info@industrialmaterialcenter.com
Datasheets for PHOENIX CONTACT 2761622 SUBCON 25/M-SH D-SUB bus connector
Description for PHOENIX CONTACT 2761622 SUBCON 25/M-SH D-SUB bus connector
Dimensions Max. cable diameter 10 mm Min. cable diameter 4 mm Width 16 mm Height 55 mm Length 79 mm Back to top Environmental conditions Ambient temperature (operation) -20 ° C ... 75 ° C Ambient temperature (stock / transport) -25 ° C ... 80 ° C Altitude ≤ 5000 m (For limitations, see manufacturer's declaration for operation by altitude above sea level) Protection class IP20 IP20 Back to top General Nominal voltage UN 50 V DC Nominal current IN 100 mA Modbus signal RS-232 RS-422 RS-485 Insertion / pull cycles> 200 SUBCON set screws 4-40 UNC Tightening torque 0.4 Nm Housing material ABS, metal coated Pin assignment All connections are 1: 1 on the screw terminal block MTTF 6706 Years (SN 29500 standard, temperature 25 ° C, working cycle 21% (5 days a week, 8 hours a day)) 1817 Years (SN 29500 standard, temperature 40 ° C, working cycle 34.25% (5 days a week, 12 hours a day)) 155 Years (SN 29500 standard, temperature 40 ° C, working cycle 100% (7 days a week, 24 hours a day)) Back to top Connection data Connection D-SUB connection No. of poles 25 Connection method D-SUB connector Connection PCB connection Connection method Screw connection Multi vein min. conductor cross section area 0,14 mm² Multicore max. conductor cross section area 1 mm² Single core min. conductor cross section area 0,14 mm² Single core max. conductor cross section 1.5 mm² Min. AWG conductor cross section, stranded 26 Max. AWG conductor cross section, stranded 18 Conductor cross section AWG min. 26 Conductor cross section AWG max. 16 Cable stripping length 5 mm Tightening torque 0.4 Nm Back to top Conformity / approvals EAC definition identification EAC Description ATEX Description II 3 G Ex nA IIC T4 Gc X Additional text Please pay attention to the special assembly instructions given in the document! Description Corrosive gas test Description ISA-S71.04-1985 G3 Harsh Group A
Latest Comments for PHOENIX CONTACT 2761622 SUBCON 25/M-SH D-SUB bus connector
İlginizi Çekebilecek Ürünler PHOENIX CONTACT