Ringfeder RfN 7013.0 Locking Assembly

Ringfeder markalı Ringfeder RfN 7013.0 Locking Assembly ürününün fiyat ve detaylarını inceleyerek hemen teklif alabilirsiniz! Ringfeder, RfN, Ringfeder RfN, 7013.0, Ringfeder 7013.0, RfN 7013.0, Ringfeder RfN 7013.0,
Hemen teklif alabilirsiniz: info@industrialmaterialcenter.com
Ürün No RfN 7013.0
Üretici Ringfeder

Description: RfN 7013.0 ( Ringfeder )

Ringfeder RfN 7013.0 Locking Assembly



Product Name: Ringfeder RfN 7013.0 Locking Assembly
Product Brand: Ringfeder
Product Code: RfN 7013.0
Product Artikel: Ringfeder RfN 7013.0 Locking Assembly
These Locking Assemblies are of single-taper design with a self-locking taper providing good self-centering action and concentricity, as well as increased torque capacity. A pre-centering hub section is not required. Integral push-off screws for disassembly are provided. This unit can be placed deep inside a bore due to it’s design. Available sizes: Metric series shafts from 20 mm to 150 mm dia. and Inch series for shafts from 1” to 4” diameter. Characteristics Excellent concentricity and very easy to dismantle – these Locking Assemblies provide particularly good concentricity between the clamped parts. The flange is reinforced at the critical point. This prevents a bending and lifting of the inner ring during installation and therefore a good dismantling is ensured. High rotation speed – the Locking Assemblies remain true-to-form during assembly and so they are suitable in applications with higher rotational speeds. High radial loads – the material strength of the RfN 7013 Locking Assemblies makes them especially suitable for applications with high radial loads.   Example applications crane running wheels couplings gearwheels flywheels fan wheels Mounting of Locking Assembly The Locking Assemblies are supplied slightly oiled and ready-to-use. The values for T, F ax , p W and p N apply to Locking Assemblies in delivery condition. Surface finishes For shafts and hub bores R a = 1,6 μm Tolerances We recommend the following mounting tolerances Shaft: h8; Hub: H8 Change of screw tightening torques A change of the TA-values given in the above table is not admissible.

Ringfeder RfN 7003 Locking Assembly

Ringfeder RfN 7004 Locking Assembly

Ringfeder RfN 7005 Locking Assembly

Ringfeder RfN 7006 Locking Assembly

Ringfeder RfN 7007 Locking Assembly

Ringfeder RfN 7013.0 Locking Assembly

Ringfeder RfN 7013.1 Locking Assembly

Ringfeder RfN 7015.1 Locking Assembly

Ringfeder RfN 7061 Locking Assembly

Ringfeder RfN 7110 Locking Assembly

Ringfeder RfN 7070 Locking Assembly

Ringfeder RfN 7075 Locking Assembly

Ringfeder RfN 7085 Locking Assembly

Ringfeder RfN 7090 Locking Assembly

İlginizi Çekebilecek Ürünler Ringfeder