BECKHOFF EL2722 2-Channel Triac Output Terminal
Product Name: BECKHOFF EL2722 2-Channel Triac Output Terminal
Product Brand: BECKHOFF
Product Code: EL2722
Product Artikel: BECKHOFF EL2722 2-Channel Triac Output Terminal
The EL2722 output terminal uses a power switch to control mains voltage from 12 V to 230 V AC. The switching element is a triac, which is connected to the power contact potential. As a semiconductor switch, it is not subject to wear. The steady load capacity of a digital output is 1 A. The EtherCAT Terminal has two independent outputs and indicates its signal state by means of light emitting diodes. The EL2722 has two mutually locked outputs and is very suitable for turning motors (blinds). Technical data EL2722 | ES2722 Connection technology triac output, 2-wire Number of outputs 2 x make contacts, mutually locked Rated load voltage 12…230 V AC Load type ohmic, inductive Distributed clocks – Max. output current 1 A (0.5 A if both outputs are on) Switching times in zero crossing, 0.1…10 ms Frequency range 47…63 Hz Surge voltage protection > 275 V Peak current 40 A (16 ms), 1.5 A (30 s) Standby current 0.6 mA Leakage current (OFF state) typ. 0.8 mA, max. 1.5 mA Switch-on time 0.1…10 ms, zero crossing Switch-off time T/2 Max. residual voltage 1.5 V (60 mA…1 A), 150 Ω (< 60 mA) Current consumption E-bus typ. 120 mA Electrical isolation 500 V (E-bus/field voltage), 3750 V AC (1 min.) Current consumption power contacts – Bit width in the process image 2 outputs Configuration no address or configuration setting Special features suitable for conventional blind motors Weight approx. 55 g Operating/storage temperature 0…+55 °C/-25…+85 °C Relative humidity 95 %, no condensation Vibration/shock resistance conforms to EN 60068-2-6/EN 60068-2-27 EMC immunity/emission conforms to EN 61000-6-2/EN 61000-6-4 Protect. class/installation pos. IP 20/variable Pluggable wiring for all ESxxxx terminals Product announcement estimated market release on request
