Product Name: HEIDENHAIN LIC 4115 Exposed Linear Encoder Product Brand: HEIDENHAIN Product Code: LIC 4115 Product Artikel: HEIDENHAIN LIC 4115 Exposed Linear Encoder
Scale LIC 4005 Measuring standard Coefficient of linear expansion Steel scale tape with absolute and incremental METALLUR track Depends on the mounting surface Accuracy grade ±5 µm Baseline error ≤ ±0.750 µm/50 mm (typical) Measuring length (ML) * in mm 140 240 340 440 540 640 740 840 940 1040 1140 1240 1340 1440 1540 1640 1740 1840 1940 2040 Greater measuring lengths of up to 28 440 mm with a single-section scale tape and individual scale carrier sections Mass Scale tape Parts kit Scale tape carrier 31 g/m 80 g + n 1) · 27 g 187 g/m Scanning head LIC 411 LIC 419 F LIC 419 M LIC 419 P LIC 419 Y Interface EnDat 2.2 Fanuc Serial Interface α i Mitsubishi high speed interface Panasonic Serial Interface Yaskawa Serial Interface Ordering designation* EnDat22 Fanuc05 Mit03-4 Mit02-2 Pana01 YEC07 Measuring step* (note measuring length limitation 2) ) 0.01 µm (10 nm) 0.005 µm (5 nm) 0.001 µm (1 nm) Calculation time t cal Clock frequency ≤ 5 µs ≤ 16 MHz – Traversing speed 3) ≤ 600 m/min Interpolation error ±20 nm Electrical connection * Cable, 1 m or 3 m, with 8-pin M12 coupling (male) or 15-pin D-sub connector (male) Cable length (with HEIDENHAIN cable) ≤ 100 m ≤ 50 m ≤ 30 m ≤ 50 m Supply voltage DC 3.6 V to 14 V Power consumption 3) (max.) At 3.6 V: ≤ 700 mW At 14 V: ≤ 800 mW At 3.6 V: ≤ 850 mW At 14 V: ≤ 950 mW Current consumption (typical) At 5 V: 75 mA (without load) At 5 V: 95 mA (without load) Vibration 55 Hz to 2000 Hz Shock 6 ms ≤ 500 m/s 2 (EN 60068-2-6) ≤ 1000 m/s 2 (EN 60068-2-27) Operating temperature –10 °C to 70 °C Mass Scanning head Connecting cable Connecting element ≤ 18 g (without cable) 20 g/m M12 coupling: 15 g; D-sub connector: 32 g * Please select when ordering 1) n = 1 for ML 3140 mm to 5040 mm; n = 2 for ML 5140 mm to 7040 mm; etc.* 2) Mitsubishi: 1 nm: measuring length ≤ 2040 mm; 5 nm: measuring length ≤ 10 040 mm; 10 nm: measuring length ≤ 20 040 mm Yaskawa: 1 nm: measuring length ≤ 1840 mm; 5 nm: measuring length ≤ 9040 mm; 10 nm: measuring length ≤ 18 040 mm 3) See General electrical information in the Interfaces of HEIDENHAIN Encoders brochure
