Product Name: HEIDENHAIN LIC 4195 P Exposed Linear Encoder Product Brand: HEIDENHAIN Product Code: LIC 4195 P Product Artikel: HEIDENHAIN LIC 4195 P Exposed Linear Encoder
Scale LIC 4005 Measuring standard Coefficient of linear expansion Steel scale tape with absolute and incremental METALLUR track Depends on the mounting surface Accuracy grade ±5 µm Baseline error ≤ ±0.750 µm/50 mm (typical) Measuring length (ML) * in mm 140 240 340 440 540 640 740 840 940 1040 1140 1240 1340 1440 1540 1640 1740 1840 1940 2040 Greater measuring lengths of up to 28 440 mm with a single-section scale tape and individual scale carrier sections Mass Scale tape Parts kit Scale tape carrier 31 g/m 80 g + n 1) · 27 g 187 g/m Scanning head LIC 411 LIC 419 F LIC 419 M LIC 419 P LIC 419 Y Interface EnDat 2.2 Fanuc Serial Interface α i Mitsubishi high speed interface Panasonic Serial Interface Yaskawa Serial Interface Ordering designation* EnDat22 Fanuc05 Mit03-4 Mit02-2 Pana01 YEC07 Measuring step* (note measuring length limitation 2) ) 0.01 µm (10 nm) 0.005 µm (5 nm) 0.001 µm (1 nm) Calculation time t cal Clock frequency ≤ 5 µs ≤ 16 MHz – Traversing speed 3) ≤ 600 m/min Interpolation error ±20 nm Electrical connection * Cable, 1 m or 3 m, with 8-pin M12 coupling (male) or 15-pin D-sub connector (male) Cable length (with HEIDENHAIN cable) ≤ 100 m ≤ 50 m ≤ 30 m ≤ 50 m Supply voltage DC 3.6 V to 14 V Power consumption 3) (max.) At 3.6 V: ≤ 700 mW At 14 V: ≤ 800 mW At 3.6 V: ≤ 850 mW At 14 V: ≤ 950 mW Current consumption (typical) At 5 V: 75 mA (without load) At 5 V: 95 mA (without load) Vibration 55 Hz to 2000 Hz Shock 6 ms ≤ 500 m/s 2 (EN 60068-2-6) ≤ 1000 m/s 2 (EN 60068-2-27) Operating temperature –10 °C to 70 °C Mass Scanning head Connecting cable Connecting element ≤ 18 g (without cable) 20 g/m M12 coupling: 15 g; D-sub connector: 32 g * Please select when ordering 1) n = 1 for ML 3140 mm to 5040 mm; n = 2 for ML 5140 mm to 7040 mm; etc.* 2) Mitsubishi: 1 nm: measuring length ≤ 2040 mm; 5 nm: measuring length ≤ 10 040 mm; 10 nm: measuring length ≤ 20 040 mm Yaskawa: 1 nm: measuring length ≤ 1840 mm; 5 nm: measuring length ≤ 9040 mm; 10 nm: measuring length ≤ 18 040 mm 3) See General electrical information in the Interfaces of HEIDENHAIN Encoders brochure