Product Name: Mts Sensor FMH Position Sensor Product Brand: Mts Sensor Product Code: FMH Product Artikel: Mts Sensor FMH Position Sensor
Input Measured value Position Stroke range 500…5000 mm (in 20 mm steps) Output Signal characteristic Analog output restricted by noise or A/D converter of control unit Voltage 0.25…4.75 VDC / 0.5…4.5 VDC Current 4…20 mA Resolution ±0.2 mm Sample rate 2 ms Accuracy Linearity ±0.04 % (F.S.) Repeatability ±0.005 % (F.S.) Hysteresis ±0.2 mm Operating conditions Mounting position Any Operating temperature −40…+105 °C Humidity 90 % rel. humidity, no condensation Ingress protection IP67 / IP69K with appropriate mating connection Pressure Nominal operating pressure (Pn) 350 bar Max. overload pressure in cylinder (Pmax) 450 bar Max. static proof pressure in cylinder (Pproof) 625 bar Environmental testing Shock test IEC 60068-2-27, 100 g (6 ms) single shock, 50 g (11 ms) at 1000 shocks per axis Vibration test IEC 60068-2-64, 2 g (5…2000 Hz) EMC test & evaluation ISO16750-2:2010 ISO 14982:2009 - Agricultural and forestry machinery ISO 13766:2006 - Earth-moving machinery EN 13309:2010 - Construction machinery RF immunity to 200 V/m per ISO 11452-2/-4 Materials and dimensions Sensor rod with flange Stainless steel 1.4306 (AISI 304L) Sensor electronics housing Stainless steel 1.4305 (AISI 303) Electrical installation Connector M12 male plug Supply voltage 12 VDC (tolerance range 8…32 VDC) 24 VDC (tolerance range 8…32 VDC) Current consumption Typ. < 100 mA Typ. < 50 mA Load (output VDC) RL> 10 kΩ RL> 10 kΩ Load current (output VDC) Typ. 1 mA Typ. 1 mA Loud (output mA) RL < 250 Ω RL < 500 Ω Inrush current Max. 2.5 A/2 ms Max. 4.5 A/2 ms Supply voltage ripple < 1 % PP Power drain < 1 W Over voltage protection (GND-VDC) Up to +36 VDC Polarity protection (GND-VDC) Up to −36 VDC Insulation Resistance R ≥ 10 MΩ @ 60 sec Electric strength 500 VDC (DC GND to chassis GND
