Mts Sensor GBS GBS Position Sensor
Product Name: Mts Sensor GBS GBS Position Sensor
Product Brand: Mts Sensor
Product Code: GB-S
Product Artikel: Mts Sensor GBS GBS Position Sensor
Output Voltage 0…10 VDC and 10…0 VDC (min. load controller: > 5 kΩ) Current 4(0)…20 mA or 20…4(0) mA (min./max. load: 0/500 Ω) Programming Programming of set points using optional accessories 2 Bluetooth® version 2.1 Measured value Position Measurement parameters Resolution 16 bit (minimum 1 µm depending on stroke length) Cycle time Up to 1200 mm: 0.5 ms Up to 2400 mm: 1.0 ms > 2400 mm: 2.0 ms Linearity typ. ≤ ±0.02 % F.S. (minimum ±60 µm) Repeatability typ. ≤ ±0.005 % F.S. (minimum ±20 μm) Operating conditions Operating temperature –40…+90 °C (–40…+194 °F), option –40…+100 °C (–40…+212 °F) Ingress protection IP67 with proper mating connector IP68 for cable outlet Shock test 100 g (single shock) / IEC standard 60068-2-27 Vibration test 15 g / 10…2000 Hz, IEC standard 60068-2-6 (resonance frequencies excluded) EMC test Electromagnetic emission according to EN 61000-6-4 Electromagnetic immunity according to EN 61000-6-2 The sensor meets the requirements of the EC directives and is marked with Magnet movement velocity Any Design/Material Sensor electronics housing 3 Stainless steel 1.4305 (AISI 303), option: stainless steel 1.4404 (AISI 316L) Sensor rod Stainless steel 1.4306; 1.4307 (AISI 304L), option: stainless steel 1.4404 (AISI 316L) Stroke length 25…3250 mm (1…128 in.) Operating pressure 350 bar, 700 bar peak (at 10 × 1 min) Mechanical mounting Mounting position Any Mounting instruction Please consult the technical drawings and the operation manual (document number: 551511) Electrical connection Connection type Cable outlet 5 pin M12 connector A-coded 6 pin M16 connector Operating voltage +24 VDC (−15 / +20 %) Ripple ≤ 0.28 Vpp Current consumption 100 mA typically dependent on stroke length Dielectric strength 500 VDC (DC ground to machine ground) Polarity protection Up to −30 VDC Overvoltage protection Up to 36 VDC
