Description: SMA-20-1/4NPT-V-W3 Art.Nr.: 1210026210 Connector ( Stauff
)
Stauff SMA-20-1/4NPT-V-W3 Art.Nr.: 1210026210 Connector
Product Name: Stauff SMA-20-1/4NPT-V-W3 Art.Nr.: 1210026210 Connector
Product Brand: Stauff
Product Code: SMA-20-1/4NPT-V-W3 Art.Nr.: 1210026210 Connector
Product Artikel: Stauff SMA-20-1/4NPT-V-W3 Art.Nr.: 1210026210 Connector
Efficiency
Coupling / uncoupling during continuous operations under full system pressure
of up to 630 bar / 9137 PSI (depending on the coupling type)
No need for a lengthy run-down or shut-down of the system
Can be connected by hand i.e. without any tools or special training needed
Materials
Sealing of NBR (Buna-N®) or optionally in FKM (Viton®) or also EPDM;
inside seals in FKM (Viton®) as a standard feature
Standard steel test couplings
Stainless steel V2A (1.4305 or AISI 303) and V4A (1.4571 or AISI 316 Ti)
available on request
Variability
Pressure and temperature monitoring and control, venting and obtaining
of representative fluid samples possible with just one coupling version
Conformity with ISO 15171-2 and fully compatible
with competitor products with slotted hose nipple (for SMK types)
Wear Resistance
Improved wear resistance and stability due to
high plastic deformability of the zinc/nickel surface
Resistance to all the usual pressure fluids
Operational Safety
Up to 3,000,000 load cycles in the impulse test
(requirements of ISO 19879: 1,000,000 load cycles)
Multi-part design with threaded nipple
(less of a hazard potential than with crimping)
No automatic releasing of the metal protective cap from vibrations
in the system thanks to a vibration-securing O-ring
Special design ensures secure, loss-free sealing
of the connection before valve opening
Wide Variety
All the usual thread and sealing types available
Knurled caps as standard
Hexagon and plastic caps available on request
Application-specific types such as natural gas versions
with DVGW specification as well as gas and fill versions
(for SKK types) available (Fill version only for gas uses)
