Tecsis F1211 Compression Load Cell
Product Name: Tecsis F1211 Compression Load Cell
Product Brand: Tecsis
Product Code: F1211
Product Artikel: Tecsis F1211 Compression Load Cell
Applications of the compression load cell
Plant engineering and production lines
Measuring and inspection equipment
Special equipment and machinery construction
Press in forces and axial joining forces monitoring
Special features of the compression load cell
Measuring ranges 0 ... 1 kN up to 0 ... 1,000 kN
For compression force measurements
Simple force introduction, easy installation
Protection class IP67
Relative linearity error 0.3 % F nom (0.1 % F nom optional)
Description of the compression load cell
Compression load cells are used to determine compression forces in a wide range of applications and are suitable for static and dynamic measurement tasks.
The electrical load cells of the F1211 series are manufactured from stainless steel and enable the measurement of high static pressure loads up to 1,000 kN. These products are available with nominal loads of 1 kN to 1,000 kN. Due to their compactness, our compression load cells are very frequently used in industrial applications and in the laboratory and test fields. Through the optionally available, increased accuracy of 0.1 % of full scale, it is also possible to use them in industrial weighing technology. The spherical calotte (spherical load application button) allows for a very simple force introduction. Standard mounting of the compression load cell is horizontal or vertical.
The load cells are splash-proof, robust and work reliably, even under difficult operating conditions. There is an optional 100 % signal control function via the detuning of the measuring bridge through an integrated, activatable shunt resistor.
In order to avoid overloading, it is advantageous to connect the compression load cell electrically during installation and to monitor the measured value.
The force to be measured must be applied concentrically and free of transverse force. The compression load cell has to be mounted on a level surface.
Specific information
Calibration control 100 % signal
Drag chain suitable
Suitable load plates, see accessories
6-wire connection
Relative linearity error 0.1% F nom
