Product Name: Tecsis F6212 Ring Force Transducer Product Brand: Tecsis Product Code: F6212 Product Artikel: Tecsis F6212 Ring Force Transducer
Applications
Cutting tools
Measurement and inspection equipment
Test benches and production lines
Press-in forces and joining forces monitoring
Force measurement on spindle drives and press spindles
Special features
Measuring ranges 0 ... 2 kN up to 0 ... 100 kN
For compression force measurements
Flat dimensions
Stainless steel measuring body
Protection class IP65
Description
Ring force transducers are designed for static measurement tasks in the direct flux of force. They determine the tension and compression forces in a wide scope of applications.
These force transducers are used in applications and test facilities with the need of a ring geometry with a big inner diameter. Typical tasks are force measurement in spindle drives or presses.
Note In order to avoid overloading, it is advantageous to connect the force transducer electrically during installation and to monitor the measured value.
The force to be measured must be applied axially rightangled of the force transducer and free of transverse force. Optionally, this ring force transducer is available on the upper and lower side with fastening threads. When mounting the force transducer, a flat, ground and hard surface should be ensured.
Options
Control function 100 % signal
Rated output adjustment on 1 mV/V
Extended nominal temperature range
